Easykon is not reachable on the network

What to check if you cannot open the Easykon web interface or the device does not appear on the network.

Easykon 1 min read

Easykon uses an Ethernet connection and must receive an IP address from the local network.

In brief: Check the cable, router port, LEDs and IP address before performing a reset.

Checks

  • Power supply present.
  • Ethernet cable connected.
  • Network port LED active.
  • Router or switch port working.
  • DHCP active or known IP configuration.
  • Computer or phone on the same network.

How to find the IP address again

  1. Open the router device list.
  2. Look for Easykon or the related MAC address.
  3. Alternatively, use a network scanning tool.
  4. Open the IP address in the browser.
  5. Restart Easykon if it does not respond.

Do not reset Easykon for KNX without a backup of the configuration and ETS project.