How to add Easykon to the Freedompro Home app

Guide to pairing Easykon with the Freedompro Home app, including initial requirements and checks if the device is not detected.

Easykon 2 min read

Pair Easykon with Freedompro Home to organize system accessories, assign them to rooms, and control them from the app. Before pairing, Easykon must be installed correctly and connected properly to the system and network.

Adding Easykon to Freedompro Home
Detection and addition of Easykon from the local network.

Before you start

  • Install or update Freedompro Home.
  • Make sure Easykon is powered and ready for pairing.
  • Enable Bluetooth and location on the smartphone.
  • Connect the phone to the correct local network.
  • Temporarily disable any VPN.
  • Keep the QR code or device security code handy.

How to add Easykon

  1. Open Freedompro Home.
  2. Tap Add module.
  3. If Easykon has already been detected, select it from the list. Otherwise choose the Easykon category.
  4. Follow the instructions shown in the app and check the LED status.
  5. Scan the QR code or enter the requested code.
  6. Wait for pairing to complete.
  7. Assign the accessories to rooms or complete this step later.

If Easykon is not detected

  • Check power, Ethernet cable, and connection to the bus or gateway required by your model.
  • Make sure the phone and Easykon are on the same local network.
  • Disable VPN, guest networks, and client isolation features.
  • Restart the app and search again.
  • Check the LED meaning in the installation guide for your Easykon model.

Expected result

Easykon will appear in the selected home and the mapped accessories can be organized and controlled through Freedompro Home.