Configure each controlled outlet so you can recognize it easily and define how it should behave after a power outage.
How to open the settings
- Open Freedompro Home.
- From the home screen, tap the menu in the top left.
- Select Module settings.
- Choose the module to configure.
- On multi-channel models, select one accessory at a time.
Available settings
- Name: indicate the device or area powered by the outlet.
- Physical control type: select the configuration that matches the connected input.
- State after a power outage: choose whether the outlet should remain off, restore the previous state, or follow the available options.
- Auto Off: use it only when the load can be safely powered off automatically.
How to save
- Check the selected settings.
- Tap Done in the top right.
- Repeat the procedure for the other module channels.
- Test control from the app and from the physical button or switch.
Important notes
- Check that the connected load is compatible with the module electrical limits.
- On multi-channel modules, configure each outlet separately.
- After editing, check operation from both the app and the physical control.
If the behavior is not correct
- Make sure you selected the correct channel.
- Check the configured physical control type.
- Check the wiring against the model diagram.
- Restart the module without resetting it and test again.
- Reset only after ruling out configuration and wiring errors.
Expected result
The module will respond consistently from the app and the physical control, keeping the settings defined for each channel.
Auto Off
Auto Off is available for lights, outlets, and dry contacts. It is disabled by default.
| Parameter | Value |
|---|---|
| Minimum | 100 ms |
| Maximum | 1 hour |
| Unit | Milliseconds, seconds, and minutes |
The same range of values is available for all supported categories.
