WC0601-E is a Freedompro module designed to control 1 shutter or rolling motor. It lets you control shutter or blind motors from the app, from compatible Matter ecosystems, and from physical controls.
In short
- Channels: 1 shutter.
- Installation point: 502/503 flush-mounted box o vano tecnico compatibile.
- Power supply: 110–240 V AC ±10%, 50–60 Hz.
- Connectivity: 2.4 GHz Wi-Fi and Matter.
- Local control: physical controls remain usable even without Internet, if the module is correctly powered and wired.
Safety: Installation must be performed by qualified personnel. Disconnect power, verify absence of voltage, and follow the wiring diagram specific to the model. Before commissioning, verify the safety of the motorized system, the end stops, and the absence of obstacles.
Before you start
- Identify the exact model shown on the label.
- Consult the model-specific wiring diagram included in this guide.
- Check power supply voltage, load type, and expected current.
- Make sure the box, panel, or technical compartment has enough space.
- Keep the Matter QR code available for pairing.
Technical specifications
| Model | WC0601-E |
| Use | 1 shutter |
| Installation | 502/503 flush-mounted box o vano tecnico compatibile |
| Dimensions | 18 × 42,3 × 41,5 mm |
| Power supply | 110–240 V AC ±10%, 50–60 Hz |
| Consumption | < 1,2 W |
| Maximum current | 14 A |
| Wi-Fi | IEEE 802.11 b/g/n, 2,4 GHz |
| Operating temperature | from −5 °C to +45 °C |
| Certifications | Matter, CE |
| Compatibility | Freedompro Home and the main Matter-certified ecosystems |
| Energy measurement | Yes, per individual channel |
How to install the module
- Disconnect power and verify absence of voltage.
- Inserisci WC0601-E dietro il comando o nel vano tecnico previsto.
- Connect the motor's upward and downward movement to outputs O1 and O2 following the wiring diagram.
- Connect the physical controls to inputs S1 and S2.
- Connect live and neutral to the power supply terminals.
- Sistema i conduttori senza forzare il modulo.
- Restore power and check the LED.
- Pair the module with Freedompro Home, configure the control, and calibrate the shutter.
Simplified wiring diagram
Use the simplified diagram to recognize the general function of the terminals. For final wiring, always also refer to the professional diagram and the product technical documentation.
Professional wiring diagram
The professional diagram shows the connections to use during installation. Do not substitute the model, power supply, or terminal functions with instructions referring to other products.
Important notes
- Usa un motore compatibile con lo schema previsto.
- Complete calibration before adding the module to other ecosystems.
- Make sure upward and downward movement cannot be powered at the same time.
App configuration
- Open Freedompro Home.
- Add the module as a new device, or use the procedure for a module already paired.
- Scan the QR code.
- Assign a name to the module.
- Configure each accessory or channel.
- Test physical controls and app control.
- Only after verification, add any other Matter ecosystems.
If something does not work
- If upward and downward movement are reversed, use the inversion option or check the wiring.
- If the position is not correct, repeat the calibration.
- If the motor does not move, check the power supply, outputs, and end stops.
- If the module is offline, check the LED and Wi-Fi network.
- Before performing a reset, recheck power supply, wiring, and configuration.
- When contacting support, provide the model, serial number, LED color, and observed behavior.
Useful articles
- How to reset a Freedompro module
- Status LEDs of Freedompro modules
- How to pair a Freedompro module with the Freedompro Home app
- How to configure and calibrate a shutter module
Consumption and power
The module measures energy and power for each individual channel. The data is visible in the Consumption section of Freedompro Home and is exposed through Matter.
Expected result
The WC0601-E module will be online, configured in Freedompro Home, and ready to control electric shutters from the app, from physical controls, and from connected Matter ecosystems.
